TP-Link CPE220 2.4GHz 300Mbps 12dB Outdoor Access Point TPLink CPE 220
Rp 599.000,00
Tambahkan Ke KranjangGaransi Resmi TP-Link Indonesia 1 Tahun
Specifications
TP-Link CPE220 2.4GHz 300Mbps 12dB Outdoor Access Point TPLink CPE 220
HARDWARE FEATURES
Processor Qualcomm Atheros 560MHz CPU, MIPS 24Kc
Memory 64MB DDR2 RAM, 8MB Flash
Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in), 1 10/100Mbps Shielded Ethernet Port (LAN1), 1 Grounding Terminal, 1 Reset Button
Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins), Voltage range: 16-27VDC
Power Consumption 10.8 Watts Max
Dimensions ( W x D x H ) 11×3.1×2.1 inch (276×79×60 mm), Antenna Type Built-in 12dBi 2x2 Dual-polarized Directional Antenna,Beam Width: 60° (H-Plane) / 30° (E-Plane)
Protection 15KV ESD Protection, 6KV Lightning Protection
Enclosure Outdoor ASA stabilized plastic material, IPX5 waterproof Certification
WIRELESS FEATURES
Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled)
Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled)
Wireless Speeds Up to 300Mbps (40MHz,Dynamic), Up to 144.4Mbps (20MHz,Dynamic), Up to 72.2Mbps (10MHz,Dynamic), Up to 36.1Mbps (5MHz,Dynamic)
Frequency 2.4~2.483GHz
Transmission Power 30dBm/1000mw (Adjustable power by 1dBm)
SOFTWARE FEATURES
Wireless Configurations Pharos MAXtream TDMA Technology
802.11b/g/n Modes
Selectable Channel Width: 5/10/20/40MHz
Automatic Channel Selection
Transmission Power Control
Dynamic Frequency Selection (DFS)
WDS Enable/Disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging (AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia